PC flame retardant socket china is used to connect and disconnect circuits and control the on and off of lighting lamps. In a narrow sense, electrical products usually only refer to switches and sockets in building electrical systems. So, do you know what causes the PC flame retardant socket china plug wire to heat up?

The reasons for the heating of PC flame retardant socket china plug wire are as follows:

Poor contact between the plug and the 86 socket, coupled with a large load power, causes the plug wire to heat up. Such as electric kettles, electric irons, etc.

2. The wire ends inside the new plug are loose, which is caused by rough production processes and other reasons.

3. The insulation performance of new plug wires declines after long-term use (or the plug wires become loose).

PC flame retardant socket china handling method: When buying a new plug wire, it is advisable to disassemble the plug to check and tighten the wire ends inside (note that the wire ends should not short-circuit). When the old plug wire gets very hot, if the wire ends are not loose, a new wire should be replaced.

PC flame retardant socket china controls the light switch. In a broad sense, electrical products cover a wide range and generally refer to providing power and electrical control for end users.

PC flame retardant socket china https://www.paiyaele.com/PC-Flame-Retardant-Panel-118A1-PC-Series-Multi-Functional-Socket.html